Joyetech CUBOID 228W Review


PROS:
  • Innovative
  • Haptic feedback
  • Big screen
  • Great battery door
  • Smooth feel
  • Updateable
  • 2 amp charging
  • Size and shape
  • Fits 25m mm atty’s
  • Clock

CONS:
  • Screen is hard to see in direct sunlight
  • 510 could be suspect
  • Have to remember to turn off touch button
  • TC Mode does not work below 0.2 ohms



9.1Total Score
Innovative

True to its name, this small device features in delivering an unexpected taste and clouds. It can also be opened for a restrictive lung hit. The device is easy to use and it does not leak and is ideal for those who do not want to complain.

Design
9
Price
9
Usability
9.5
Functions
9
Performance
9

What is Joyetech CUBOID TAP 228W

Joyetech have introduced brand new vaping technology, the TAPTEC system. The Cuboid Tap features touch sensitive buttons, up to 228W of power, large OLED screen, various output modes and houses two 18650 batteries (not included). This stylish yet cutting edge e-cig mod is the ideal companion to a wide variety of e-liquid tanks, RDA’s and RTA’s.

Product Specification

  • Size: 28.0 x 41.0x 86.0mm

  • Output mode: Power/Clock/Temp (Ni, Ti, SS316)/TCR (M1/M2/M3)/USB Charge mode
  • Features: TAPTECTM, pressure-sensitive, vibration motor, 2A QC, power bank, preheat, custom logo, real-time clock
  • Depth of 510 pins applicable: 4.0-5.5mm
  • Resistance range: 0.05-1.5ohm under Temp/TCR mode;0.1-3.5ohm under Power/Clock mode
  • Temperature control: 100-315°C/ 200-600°F
  • Battery using: dual married high-rate 18650 cells (continues discharge current 25A)
  • Max charging current: 2.0A
  • Max output current: 50A
  • Output range: 1-228W

Features

  • TAPTEC technology changes what matters 
  • Pressure-sensitive capability applied
  • Vibrates once taps
  • 228W with 50A maximum output current
  • Equalizing charge system
  • Innovative buck-boost technology
  • Quick charge system
  • Power bank for reverse charge
  • Onboard reverse polarity protection
  • Dual circuit protection
  • Applicable for various tanks
  • Upgradeable firmware

Functionality

228W with 50A maximum output current

The CUBOID TAP is powered by dual 18650 high-rate batteries where max output can be reached to 228W. It offers more possibilities when using various coils with its 50A maximum output current.

TAPTEC technology changes what matters

Physical regulatory buttons are replaced by the new Joyetech TAPTEC technology that requires simply tap of the panel, then it’s all under your control

Pressure Sensors

In the sides of the Cuboid Tap are pressure sensors, these allow you to gently squeeze your e-cig to access screen functions. You can squeeze three, four or five times for a different menu option.
Thanks to the advanced technology in our time. The CUBOID TAP adopted the pressure-sensitive system inside, with which you can active the menu by clutching the device in sequence.

Power on condition

3 times to lock/unlock tap buttons
4 times to activate the menu
5 times to turn stealth on/off

Power off condition

3 times to set TCR value
4 times to turn screen upside down
5 times to check battery voltage

Touch Buttons

The touch sensitive buttons mean that you can fully control your device with a ‘tap’. The firing button and menu selection buttons are activated by ‘tapping’ with your fingers, they provide vibration feedback for each tap so you know your touch has registered. There is also a traditional firing button on the side of the Cuboid Tap.

Vape in a safe way

For safety reasons, if you hold the fire button for 10 seconds, the device will shout down automatically. Press the fire button 5 times to turn it on again.

Vibrates once taps

The vibration motor is built in such a way that it is partially off-balanced. Once you tap the panel, it vibrates to indicate that the adjustment is made.

Reverse Charging

The Cuboid Tap is enabled with quick charge technology, this coupled with the trickle charge system allows you to quickly charge your batteries within the device as they will charge at the same rate. You can also utilise your Tap as a power bank thanks to reverse charging technology (sold separately).

Equalizing charge system

Equalizing charge technology was applied in order to bring all cells to an equal state of charge.

Innovative buck-boost technology                                                                    Quick charge system

The CUBOID TAP adopts the innovative buck-boost technology to provide much steadier output power.

The CUBOID TAP has 2.0A maximum charging current with which it can get fully charged more quickly than normal ones when using the Avatar quick charger (sold separately).

On board reverse polarity protection                                                             Dual circuit protection

The on board reverse polarity protection protects the device from damage in the event of reverse battery installation.

It applies two sets of battery protection circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes it more safe and reliable.

Applicable for various tanks

The exquisite spring loaded 510 connector of the CUBOID TAP is applicable for tanks with 510 length ranged at 4.0mm to 5.5mm.Tanks are also free to go up to 25mm diameter as you prefer.

Upgradeable firmware

CUBOID TAP comes with the upgradeable firmware. Having the latest firmware, real-time clock, preheat, custom logo, and reverse charging are all available.

Who Should Purchase?

CUBOID TAP is an ideal device for the advance users who know how to tweak and play with the advance features.

Alternative solutions

Joyetech Ocular C 150W TC Box Mod

Is it worth buying?

True to its name, this small device features in delivering an unexpected taste and clouds. It can also be opened for a restrictive lung hit. The device is easy to use and it does not leak and is ideal for those who do not want to complain.

We will be happy to hear your thoughts

Leave a reply