- Excellent form factor with its tiny size
- Packs 30W with Temperature Control incorporated
- Can use existing coils of ego series
- Spare gaskets and silicone rings
- Works with a syringe tank
- Cannot lock resistance
- Cannot vary wattage in the VT mode.
- Cannot work below 0.2 Ohms
If you are looking for a simple device to sit back and make puffs its the device yo need.
What is Joyetech eGrip OLED VT MOD 30W
eGrip VT, applies with the Variable Temperature Control system, supporting VT-Ti (Titanium)/ VT-Ni (Nickel-200)/ VW mode with an OLED screen. It also boasts a 360-degree regulation ring to adjust output wattage or temperature. The compact size with multiple colors catering to your preference makes it always comfortable to hold.
- Size: 22.20 x 38.20 x 82.00mm
- Output mode: VT-Ti/VT-Ni/VW mode
- Output wattage: 1-60W
- Resistance range: 0.05-1.0ohm for VT mode
- 0.15-3.5ohm for VW/Bypass mode
- Temperature range: 100- 315C/ 200- 600F
- Support Three Modes:VT-Ni, VT-Ti, Traditional VW;
- Support with Pure Nickel(Ni200, made in USA) and Pure Titanium wire, and 100% organic cotton;
- 60W, 8V, 5000mAh large battery capacity;
- Save huge of battery and liquid consumption without a dry hit
- Enhance flavor experience with the change of temperature settings by displaying in the big OLED screen;
- Matching all VT atomizers and heads or batteries
Attractive Colors, Easy Operation
Carrying six attractive colors, eGrip VT presents you with a compact design based on the previous eGrip series, which is convenient to hold and easy to vape.
The eGrip VT OLED screen shows you everything you need: the mode, ohm,temperature, watts, and battery life.
The vent pipe of eGrip VT can be detached from the body. Take off the mouthpiece then use the tiny tool in the box (or a coin) to unscrew the vent pipe from the top so as to clean it individually. Remember to screw all the spare parts tightly before use.
Variable Temperature Control
Being simple in operate and wonderful in vaping, eGrip VT applies with three modes: Ni, Ti and VW Modes.
Press the fire button for three times to shift between VT-Ni/VT-Ti/VW Modes when the battery is on.
Under VT mode, you can adjust temperature between 100-315℃/200-600℉.
Multi Types of Atomizer Heads for Option
With the eGrip CL base, it controls Nickel 200(Ni), Titanium (Ti) Heating Wire as well as eGo ONE CL 1.0ohm coil.
Regulation of Air Inlet
Spin the adjustable screw on the side of the bottom. Contrarotate the screw will loosen the screw. The looser the screw is, the bigger the air inlet is.
It takes 2.5 hours to fully charge the battery via 1A wall adapter. The battery level indicator on the OLED screen will keep flashing during charging. When fully charged, the indicator will stop flashing and go out.
Who Should Purchase?
It is ideal for the beginners.
Is it worth buying?
Yes its easy to use and not heavy on pocket.