Wismec Noisy Cricket 2 Manual Operations Guide

Wismec Noisy Cricket 2

wismec noisy cricket 2How to use:

Power on/off:

Push the bottom cover and take it away , put two cells into the battery body. Press the fire button 5 times in quick succession, the button light will flash 5 times to indicate that it is ready for use. In the same way, it can be turned off after 5 presses.


Long press the button to take a puff.


Take out the cells and charge them through external charger.

Cells in Parallel Circuit Condition:

Connect the circuit board with “P” to battery cells and only direct output mode is applied in parallel circuit condition. The output voltage changes automatically according to the battery level.

Cells in Series Circuit Condition:

Connect the circuit board with “S” to battery cells. When powered off, long press the fire button for about 5 seconds to shift between direct output mode (white light) and constant voltage output mode (orange light, 2-6V). Release the fire button to choose the current mode.


Atomizer Protection:

When the fire button is pressed for more than 10 seconds, the fire button will flash 10 times and then shut off automatically.

Short Circuit Protection:

(1). Power input would be directly shut down due to electric power board and needs charging to reactivate.

(2). Short circuit before working: button light flashes for 3 times quickly and then power-off.

(3). Short circuit while working: button light flashes for 3 times slowly and then shut down.

Low Voltage Protection:

When the battery voltage is less than 6.6V in series circuit or less than 3.3V in parallel circuit, the button light flashes for 40 times and then power-off.

Battery Display Function:                                                          wismic Noisy cricket 2 Battery

The button light will stay lit or flash slowly after a puff when the battery quantity is high. On the contrary, the light will flash frequently.


Keep out of reach of children.

This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, persons who are allergic/sensitive to nicotine.


Only have your product repaired by Wismec. Do not attempt to repair the unit by yourself as damage or personal injury may occur.

Do not leave the product in high temperature or damp conditions, as this may damage the product. The appropriate operation temperature is within 0°C to 45°C while charging and -10°C to 60°C while in use.

Keep away from water.

Possible adverse effects

Use of this product may cause damage to health.

For people with adverse reaction after using this product, it is recommended to use the juice with lower nicotine content or no nicotine.

We will be happy to hear your thoughts

Leave a reply